You are here: MyURC.org > Tools & Prototypes > DragIt > Installation Notes

DragIt - Installation Notes

---

Page Contents:

---

Installation

DragIt is included (out-of-the-box) in the UCHj and UCHe software packages.

After installation of UCHj/UCHe, start DragIt by directing Internet Browser to the following address:

• In case of UCHj: http://192.168.0.1/UCH/DragIt/ (replace "192.168.0.1" with the ip address of the computer running UCHj)
• In case of UCHe: http://192.168.0.1/DragIt/ (replace "192.168.0.1" with the ip address of the machine running UCHe)

NOTE: In Internet Explorer 6.0+, to evade from the annoying IE Information Bar for security risk, follow the instructions at: http://dhtmldev.com/content/view/96/30/

Trouble Shooting

If discovery of targets doesn't work:

1. DragIt has only been tested with Firefox 3.0+ and IE 6+. Please use one of these browsers.
2. Always use the full IP address of the computer that the UCH is running on. Do not use "localhost" as a placeholder for your local ip address.
3. In IE, activate the following options:
   • Internet options... > Advanced > Security, "Allow active content to run from my computer"
4. Make sure your UCH is running well.
   • For UCHj, refer to UCHj trouble-shooting.
   • For UCHe, refer to UCHe trouble-shooting.

---

Last update: Gottfried Zimmermann, Parikshit Thakur, 2009-03-31