You are here: MyURC.org > Tools & Prototypes > Webclient > Installation Notes

Webclient Installation Notes

---

Page Contents:

---

Installation

Webclient is included (out-of-the-box) in the UCHj and UCHe software packages.

After installation of UCHj/UCHe, start the Webclient by directing your browser (IE7 or Firefox 2.0+) to the following address:

• For UCHj:
  • Auto-generate mode: http://192.168.0.1/UCH/Webclient/ (replace "192.168.0.1" with the ip address of the computer running UCHj)
  • HTML template mode (custom controller page): http://192.168.0.1/UCH/Webclient/filename (replace "192.168.0.1" with the ip address of the computer running UCHj, and "filename" with the name of the controller file, e.g. "SatelliteBox.html")
• For UCHe:
  • Auto-generate mode: http://192.168.0.1/Webclient/ (replace "192.168.0.1" with the ip address of the machine running UCHe)
  • HTML template mode (custom controller page): http://192.168.0.1/Webclient/filename (replace "192.168.0.1" with the ip address of the computer running UCHj, and "filename" with the name of the controller file, e.g. "SatelliteBox.html")

Trouble Shooting

If discovery of targets doesn't work:

1. Always use the full ip address of the computer that the UCH is running on. Do not use "localhost" as a placeholder for your local ip address.
2. Make sure your UCH is running well.
   • For UCHj, refer to UCHj trouble-shooting.
   • For UCHe, refer to UCHe trouble-shooting.

---

Last update: Gottfried Zimmermann, Parikshit Thakur & team, 2009-03-31